4.5 Monitoring Evidence Inspection Objects
The Inspection Objects function is divided into several areas:
BGV-A2
With BGV-A2, independent inspection objects are:
With the Inspection History button, you can switch to the inspection system.
Grounding and Potential Equalization
In addition to detailed inspection, visual inspections can be activated and subjected to inspection tracking.
Prerequisite is the setup of a Measuring Point with identifier R in the EzA/S list and in the Safety Review (Example: B-R 99611).
On the back page of the Monitoring Evidence, the Grounding points can be assigned.
Fixed Electrical Systems (Lighting)
Procedure:
Set up Ex zones with „Set up explosive zones and inspection times“:
Select a building in the dropdown field
Define Ex zone by building and floor
For multiple Ex zones per floor, assign different zone numbers
Initialize the building inspection by selecting the first inspection zones
Calculate the inspection zone times
Activate the individual inspection zones in the Monitoring Evidence
Background info: For „Lighting Ex“ inspection zones, all Ex zones per building must be inspected every 36 months. An inspection must be performed at least semi-annually.
Battery/Accumulator and Test Equipment
For creating a new inspection:
Define a new inspection name in the dropdown field under the heading
Define sequential number and inspection object name
Activate and define inspection cycle
After activation, the inspection objects appear in the system Inspection History → Inspection Objects.
← 4.4 Evidence Measuring Points | 4.6 Evidence Canned motors →