====== 4.2 {{wvds:i18n>pims_safety}} ======

{{wvds:title>04.02 {{wvds:i18n>pims_safety}}}}

<note important>
Entries in the {{wvds:i18n>pims_safety}} affect **subsequent documents**!
</note>

{{wvds:image>pims:image11.png|width=100%|alt=Safety Review Form}}

===== Data Processing =====

The following values influence further data processing:

  * PLT position number (all 3 fields; data transfer from 1st field to contact)
  * Classification
  * Decision tree S, A, G and W
  * Incident regulation
  * Classification
  * Functional test cycle
  * Visual inspection

<note>
The calculation of the **risk class** is performed by the system according to the decision tree.
</note>

===== Classification =====

Classification of switch contacts and alarms is only possible according to the preselection on the left side of the form.

The definition of the **functional test cycle** is used in further processing for calculating inspection histories.

===== Form Change =====

Transition buttons exist to:
  * EzA/S List
  * {{wvds:i18n>pims_test_spec}}
  * {{wvds:i18n>pims_monitoring_evidence}}

<note tip>
You can switch between these forms while retaining the {{wvds:i18n>pims_measuring_point}} number.
</note>

===== Creating a New {{wvds:i18n>pims_safety}} =====

  - In the EzA/S list, create a new record (fill in at least the colored fields)
  - Check the **"{{wvds:i18n>pims_safety}}"** checkbox
  - Answer the question with **Yes**
  - Use the form change button to switch to the {{wvds:i18n>pims_safety}}
  - Fill in the red-highlighted fields
  - Save using the record bar

<note>
The selection of an **A classification** is done automatically by selecting the fields Damage Extent, Duration of Stay, Danger Prevention, and Probability of Occurrence.
</note>

===== Deletion =====

Deletion is done in the EzA/S list by removing the checkmark in the "{{wvds:i18n>pims_safety}}" field.

----

[[.:01-list|← 4.1 EzA/S List]] | [[.:03-inspection-spec|4.3 {{wvds:i18n>pims_test_spec}} →]]